Frequency Response
Digital
- 20Hz-9.75kHz +/- 0.1 dB
Analog
- 30Hz-9.75kHz +/- 0.5dB
Noise
Digital
- <-110 dBFS
Analog
- <-75dB ref: Limit point +8dBu
Distortion
Digital
- <- 90dB / 0.003 % THD
Analog
- <- 70 dB/0.03% THD
Inputs
Analog
- Active balanced, 10k (bridging), standard operating level -6dBu to +14dBu (clip +22dBu)
Digital
- AES-3 (XLR); 32, 44.1, 48, 88.2, 96kHz sample rate. 16, 20, or 24 bits
Output
Analog
- Active true balanced, standard operating level -6dBu to +21dBu
Digital
- AES-3 (XLR); full input rate / half rate
Processing blocks
High-Pass
- 3 dB Frequencies 3Hz [DC block], 20Hz, 30Hz, 45Hz, 75Hz, 90Hz, 135Hz, 150Hz, 180Hz
Phase Rotator
- Cancels asymmetry in certain programme material
Gated AGC
- Capture range 40dB (+/-20dB); maximum positive gain can be set
Advanced AGC enables faster, programme-dependent operation
Compressor
- Nominal 2:1 slope
Presence Enhancer
- Boosts selected frequencies for intelligibility and/ or brightness
Limiter
- Look-ahead limiters plus NCDCS anti-aliasing clipper
Low-Pass Filter
- Cut-off frequency 4.5kHz, 5kHz, 5.5kHz, 6kHz, 7.5kHz, or 10kHz NRSC compliant
HF Limiter
- 50ms or modified 75ms (NRSC) emphasis curve
Control
- Setup is via PC GUI only. Select a factory preset, modify it, set levels etc, save to Flash memory, USB on front panel, plus RS-232 on rear panel. ASCII Text based command format. Choice of 'Easy' mode (simplified, with Wizard), or Expert mode for GUI control
Power
- 100-240V AC Nominal (acceptable range 88V to 264V AC) / 6 Watts
Computer Control
- Every processing parameter, including all thresholds and time constants, can be accessed and modified under PC control
Approvals
- CE (EMC & LVD), RoHS
Dimensions
- 1-RU: 44 x 482 x 290 mm (1.73 x 18.97 x 11.41")
Weight
- 1.8 kg (3.96lbs)